Keysight WLAN Measurement Guide 37
Making WLAN Measurements
Making Spectrum Emission Mask Measurements
Measurement Example Signal Settings
Frequency:
2412 MHz
Output Power: -30 dBm (at analyzer input)
WLAN signal radio standard: 802.11n/40 MHz
Data Rate:
270 Mbps 64 QAM
Measurement Procedure
Step
Action
Notes
1.
Select WLAN Mode.
a. Press
MODE
,
WLAN
.
2.
Preset the analyzer.
a.
Press
Mode Preset
button for the
factory preset.
b.
To recall a user-defined Preset: Press
User Preset
,
User Preset
to preset the
current mode.
3.
Select the desired radio
standard.
a. Press
MODE Setup
,
Radio Std
,
802.11n
,
802.11n (40 MHz)
.
4.
If necessary, select the
frequency settings.
a. Press
FREQ Channel
,
2412
,
MHz
.
5.
Select the measurement.
a. Press
MEAS
,
Spectrum Emission
Mask
.
6.
Examine the keys that are
available to change
measurement parameters
from their default conditions.
a. Press
Meas Setup,
then select the
parameters you want to change and input
your settings.
7.
Select the spectrum
emission mask measurement
again or restart the
measurement.
a. Press
Meas, Spectrum Emission Mask
,
or press
Restart
.