84 Keysight WLAN Measurement Guide
Making WLAN Measurements
Making I/Q Waveform Measurements
Example of One-Button-Measurement - I/Q Waveform
This example assumes the signal is correctly applied to the input.
Step 1.
Press
Mode Preset
Step 2.
Press
Meas, IQ Waveform
Step 3.
View the measurement default view. (See
).
Figure 2-35
I/Q Waveform (Default View)
If you have a problem, and get an error message, see
Instrument Messages
.
Example of Using SCPI Commands
Select WLAN mode
INST WLAN
Select the I/Q Waveform measurement
CONF:WAV
Get the measurement result unprocessed I/Q trace data, as a series of trace
point values in volts.
READ:WAV[0]?