44 Keysight WLAN Measurement Guide
Making WLAN Measurements
Making Spurious Emissions Measurements
Measurement Example Signal Settings
Frequency:
2412 MHz
Output Power: -30 dBm (at analyzer input)
WLAN signal radio standard: 802.11n/40 MHz
Data Rate:
270 Mbps 64 QAM
Measurement Procedure
Step
Action
Notes
1.
Select WLAN Mode.
a. Press
MODE
,
WLAN
.
2.
Preset the analyzer.
a.
Press
Mode Preset
button for the
factory preset.
b.
To recall a user-defined Preset: Press
User Preset
,
User Preset
to preset the
current mode.
3.
Select the desired radio standard.
a. Press
MODE Setup
,
Radio Std
,
802.11n
,
802.11n (40 MHz)
.
4.
If necessary, select the frequency
settings.
a. Press
FREQ Channel
,
2412
,
MHz
.
5.
Select the measurement.
a. Press
MEAS
,
Spurious Emissions
.
6.
Examine the keys that are available
to change measurement parameters
from their default conditions.
a. Press
Meas Setup,
then select the
parameters you want to change and
input your settings.
7.
Select the spurious emissions
measurement again or restart the
measurement.
a. Press
Meas, Spurious Emissions
, or
press
Restart
.