manualshive.com logo in svg

Keysight U8903B, Руководство по обслуживанию

Поделиться
Скачать
Keysight U8903B Скачать руководство пользователя страница 8

8

Keysight U8903B Service Guide

Waste Electrical and Electronic Equipment (WEEE) Directive 2002/

96/EC

This instrument complies with the WEEE Directive (2002/96/EC) marking requirement. This 
affixed product label indicates that you must not discard this electrical or electronic 
product in domestic household waste. 

Product category:

With reference to the equipment types in the WEEE directive Annex 1, this instrument is 
classified as a “Monitoring and Control Instrument” product.

The affixed product label is as shown below.

Do not dispose in domestic household waste.

To return this unwanted instrument, contact your nearest Keysight Service Center, or visit 

www.keysight.com/environment/product

 for more information.

Sales and Technical Support

To contact Keysight for sales and technical support, refer to the support links on the 
following Keysight websites:

–

www.keysight.com/find/U8903B

 

 

(product-specific information and support, software and 

 

documentation updates)

–

www.keysight.com/find/assist

 

(worldwide contact information for repair and service)

Содержание U8903B






































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды