Keysight InfiniiVision M9241A Скачать руководство пользователя страница 69

Страница: 69 / 72

Reference

Keysight M9241/42/43A PXIe Oscilloscopes and M9240A AutoProbe Power Module Startup Guide

Measurement Category Definitions

The "Not rated for CAT II, III, IV" measurement category is for measurements

performed on circuits not directly connected to MAINS. Examples are

measurements on circuits not derived from MAINS, and specially protected

(internal) MAINS derived circuits. In the latter case, transient stresses are variable;

for that reason, the transient withstand capability of the equipment is made known

to the user.

Measurement category II is for measurements performed on circuits directly

connected to the low voltage installation. Examples are measurements on

household appliances, portable tools and similar equipment.

Measurement category III is for measurements performed in the building

installation. Examples are measurements on distribution boards, circuit-breakers,

wiring, including cables, bus-bars, junction boxes, switches, socket-outlets in the

fixed installation, and equipment for industrial use and some other equipment, for

example, stationary motors with permanent connection to the fixed installation.

Measurement category IV is for measurements performed at the source of the

low-voltage installation. Examples are electricity meters and measurements on

primary overcurrent protection devices and ripple control units.

Product Markings

These symbols are used on the M9241/42/43A PXIe oscilloscopes.

WARNING

Use this instrument only for measurements within its specified measurement

category (not rated for CAT II, III, IV). No transient overvoltages allowed.

Symbol

Description

Caution, refer to accompanying documentation

Caution, hot surface

Avoid static discharge

This symbol indicates separate collection for electrical and electronic

equipment mandated under EU law as of August 13, 2005. All electric

and electronic equipment are required to be separated from normal waste

for disposal (Reference WEEE Directive 2002/96/EC).

Содержание InfiniiVision M9241A









































































Результаты поиска

Содержание InfiniiVision M9241A

Отзывы:

Похожие инструкции для InfiniiVision M9241A

Бренды по названию

Популярные бренды

Keysight InfiniiVision M9241A, Руководство для стартапов

Результаты поиска

Содержание InfiniiVision M9241A

Отзывы:

Похожие инструкции для InfiniiVision M9241A

Бренды по названию

Популярные бренды