Keysight InfiniiVision M9241A Скачать руководство пользователя страница 27

Страница: 27 / 72

Install the Software

Keysight M9241/42/43A PXIe Oscilloscopes and M9240A AutoProbe Power Module Startup Guide

Power Up the Controller

If you are using an embedded controller, complete the following steps:

Install the embedded controller module into the compatible chassis. The

Keysight M9036A PXIe Embedded Controller and Keysight M9018A PXIe

Chassis are recommended. Please refer to the embedded controller and chassis

documentation for further details.

Connect peripherals (mouse, keyboard, monitor).

Power up the chassis.

Software Installation Overview

This installation includes the following:
• Keysight IO Libraries Suite (IOLS), which includes the Keysight Connection

Expert. This software is included with your shipment, and is also available at

www.keysight.com/find/iosuite

. This software must be installed first.

• Instrument software, which includes the soft front panel (SFP), device drivers

(IVI-C, IVI-COM, and LabVIEW G) and documentation for the Keysight

M9241/42/43A PXIe oscilloscopes and M9240A AutoProbe power module. This

software is included with your shipment and is also available at

www.keysight.com/products/M9241A

Software Installation Procedure:

Install the Keysight IO Libraries Suite. Follow the installer prompts to install the

IO libraries.

Install the M924x InfiniiVision Oscilloscope software.

CAUTION

If you are using a remote controller and you have installed the interface cable, you

must power up the chassis BEFORE you power up the PC. When you power down your

chassis, Shut Down the PC BEFORE you power down the chassis.

NOTE

Version 17.2 (or later) of the Keysight IO Libraries Suite is required.

CAUTION

When installing the IO Libraries Suite and instrument software, either use the two CDs

shipped with the product OR the two download files from keysight.com. Installing a

mix of CD and keysight.com download files can result in incompatible software

versions.

Содержание InfiniiVision M9241A









































































Результаты поиска

Содержание InfiniiVision M9241A

Отзывы:

Похожие инструкции для InfiniiVision M9241A

Бренды по названию

Популярные бренды

Keysight InfiniiVision M9241A, Руководство для стартапов

Результаты поиска

Содержание InfiniiVision M9241A

Отзывы:

Похожие инструкции для InfiniiVision M9241A

Бренды по названию

Популярные бренды