Keysight InfiniiVision M9241A Скачать руководство пользователя страница 36

Страница: 36 / 72

Keysight M9241/42/43A PXIe Oscilloscopes and M9240A AutoProbe Power Module Startup Guide

Make a Measurement

Input a Signal

The first signal to input to the oscilloscope is the Probe Comp signal. This signal is

used for compensating probes.

Connect an oscilloscope probe from channel 1 to the Probe Comp terminal on

the front panel.

Connect the probe's ground lead to the ground terminal (next to the Probe

Comp terminal).

Using the Soft Front Panel (SFP) Interface

The Keysight InfiniiVision M924xA SFP has the same user interface as other

standalone Keysight InfiniiVision oscilloscopes. While standalone oscilloscopes

have keys, softkeys, and knobs—obviously different than the modular

oscilloscopes—the display interface was also designed to be used with touch

screens and connected USB mice, and it is just as easy to use with a mouse on the

Windows operating system.

The main differences between using the interface on a standalone oscilloscope

and a modular oscilloscope are:
• Instead of pressing front panel keys to open softkey menus, you use the top-left

blue

Main Menu

button.

• Instead of pressing softkeys, you click the softkey label buttons.
• Instead of turning knobs to adjust scales, offets, delay positions, trigger levels,

and cursor positions, there are clickable up/down, increase/decrease icon

buttons that appear after clicking these values. Also, you can drag waveforms,

trigger levels, and cursors.

Access the Built-In Quick Help

Soft Front Panel (SFP) help for the PXIe oscilloscope is different than in a

traditional Windows application. Instead of a Windows HTML Help file you access

through a Help menu, the PXIe oscilloscope's SFP help is the same quick help

information that is built-in to standalone InfiniiVision oscilloscopes.

To access the built-in quick help, press and hold the left-mouse button over a

softkey label button.

Содержание InfiniiVision M9241A









































































Результаты поиска

Содержание InfiniiVision M9241A

Отзывы:

Похожие инструкции для InfiniiVision M9241A

Бренды по названию

Популярные бренды

Keysight InfiniiVision M9241A, Руководство для стартапов

Результаты поиска

Содержание InfiniiVision M9241A

Отзывы:

Похожие инструкции для InfiniiVision M9241A

Бренды по названию

Популярные бренды