3
Programming
182
Keysight 53147A/148A/149A Operating and Programming Guide
Condition Register
A condition register continuously monitors the hardware and firmware status of
the instrument. There is no latching or buffering for this register; it is updated in
real time. Reading a condition register does not change
its contents.
To read the condition registers use:
:STATus:OPERation:CONDition?
:STATus:QUEStionable:CONDition?
Transition Filter
A transition filter specifies the transition criteria for setting event
bits TRUE.
When the transition filter specifies a positive transition, the event becomes TRUE
when its associated condition makes a FALSE to TRUE transition only.
When the transition filter specifies a negative transition, the event becomes TRUE
when its associated condition makes a TRUE to FALSE transition only.
When the transition filters specify both a positive and a negative transition, the
event becomes TRUE when its associated condition makes either a FALSE to
TRUE or a TRUE to FALSE transition.
A transition filter is defined by positive and negative transition filter registers.
describes how the transition filter registers define the transition criteria
for setting an event bit TRUE.
Table 3-10
Transition Filter Definition
Positive
Transition
Filter Bit
Negative
Transition
Filter Bit
Transition Which Causes the Event-Bit to be set TRUE
TRUE
FALSE
positive transition
FALSE
TRUE
negative transition
TRUE
TRUE
either a positive or negative transition
FALSE
FALSE
neither transition (event reporting is disabled)
Содержание 53147A
Страница 1: ...Keysight 53147A 148A 149A Microwave Frequency Counter Power Meter DVM Operating and Programming Guide ...
Страница 20: ...20 Keysight 53147A 148A 149A Operating and Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...
Страница 310: ...312 Keysight 53147A 148A 149A Operating and Programming Guide THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK ...