Keysight Technologies N9322C Скачать руководство пользователя страница 178

Страница: 178 / 214

Instrument Messages

Command Errors

170

-112

Program mnemonic too long

The header contains more than 12 characters.

-113

Undefined header

The header is correct in syntax, but it is undefined for this
device.

-128

Numeric data not allowed

A legal numeric data element was received, but the device
does not accept one in this position for the header.

-130

Suffix error

This error is generated when parsing a suffix. This message
is used when the device cannot detect more specifics
described for errors - 131 to - 139.

-131

Invalid suffix

The suffix does not follow the syntax described in

IEEE

488.2

, or the suffix is inappropriate for the device.

-134

Suffix too long

The suffix contained more than 12 characters.

-138

Suffix not allowed

A suffix was encountered after a numeric element which
does not allow suffixes.

-144

Character data too long

The character data element contains more than 12
characters.

-148

Character data not allowed

A legal character data element was encountered where
prohibited by the device.

Содержание N9322C























































































































































































































Результаты поиска

Содержание N9322C

Отзывы:

Keysight Technologies N9322C, Руководство пользователя, Страница: 178 / 214

Результаты поиска

Содержание N9322C

Отзывы: