manualshive.com logo in svg

Keysight Technologies N9322C, Руководство пользователя, Страница: 10 / 214

Поделиться
Скачать
Keysight Technologies N9322C Скачать руководство пользователя страница 10

Overview

 

N9322C at a Glance

2

N9322C at a Glance

The Keysight N9322C spectrum analyzer is a portable, swept 
spectrum

 

analyzer

 

with

 

a

 

frequency

 

range

 

of

 

9

 

kHz

 

to

 

7.0 GHz.  It  can  be  widely  used  in  an  electronic 
manufacturing environment and in functional/final/QA test 
systems.

Features

The Keysight N9322C spectrum analyzer primary features 
and functions are described below:

• Power Measurement Suite

The built- in one- button power measurement suite offers 
channel power, ACP, OBW, and TOI measurements, and 
contains a Pass/Fail testing capability with a mask for 
out- of- channel emissions measurement.

• Precision Frequency Reference (Option PFR)

The optinal OCXO frequency reference provides the precise 
frquency measurement capability.

• Spectrum Monitor (Option MNT)

Provides the capability to analyze the stability of a signal 
over time. The analyzer can be used to monitor the signal 
capturing performance or intermittent event over extended 
periods of time.

• High Sensitive Measurement (Option P07)

Includes an optional pre- amplifier for signals in the 
frequency range up to 7 GHz, enabling more sensitive 
measurements. This feature is a great help in analysis of low 
level signals.

• High Accuracy Power Measurement

Supports Keysight U2000 series (option PWM) and U2020 
series (option PWP) power sensors for high accuracy power 
measurement as a power meter.

Содержание N9322C























































































































































































































Отзывы:

Нет отзывов