Keysight Technologies N5290A, Руководство по установке

Страница: 31 / 96

Keysight N5290/1A Installation Guide 2-7
System Description
N5290/1A Network Analyzer Millimeter-wave System
System Configurations
Table 2-1 and Table 2-2 document all supported configurations for
S-Parameter measurement capabilities for mm-wave systems using the
N5292A Option 200 and N5292A Option 400 test set controllers.
System Contents
Use the tables below to verify that the shipment is complete. These are items
that are supplied with all complete N5290/1A systems. A complete system is
shipped in multiple containers. Be sure to open all containers when verifying
that every system component has been received.
To verify the contents shipped with your product, refer to the “Box Content
List” included with the shipment. For a list of option components, refer to Table
2-3 on page 2-8 through Table 2-6 on page 2-11 .
Inspect the shipping container. If the container or packing material is
damaged, it should be kept until the contents of the shipment have been
checked mechanically and electrically. If there is physical damage refer to
“Contacting Keysight” on page 4-4 . Keep the damaged shipping materials (if
any) for inspection by the carrier and an Keysight Technologies representative.
Table 2-1 PNA Based Configurations
PNA Model(s) Required
Options
Test Set
Controller
Interconnect
Kit
N5222B 2-Port 205 N5292A-200 N5292A-222
N5227B 2-Port 205 N5292A-200 N5292A-224
Table 2-2 PNA-X Based Configurations
PNA-X
Model(s)
Required
Options
Test Set
Controller
Interconnect
Kit
N5242B 4-Port 425 N5292A-400 N5292A-442
N5247 4-Port 425 with 029 N5292A-400 N5292A-444
To reduce the chance of electrostatic discharge, follow all of the
recommendations outlined in “Electrostatic Discharge Protection” on
page 1-7 .