Keysight Technologies N5224A Скачать руководство пользователя страница 25

Страница: 25 / 362

Keysight N5224A/25A Service Guide 2-7

General Product Information
Keysight Support, Services, and Assistance

Keysight Support, Services, and Assistance

Information on the following topics is included in this section.

—

“Service and Support Options”

—

“Contacting Keysight”

—

“Shipping Your Analyzer to Keysight for Service or Repair”

Service and Support Options

The analyzer’s standard warranty period is one year from the time of initial

delivery. All repairs require the analyzer to be shipped to the nearest Keysight

Technologies service center. Extended warranty periods can be purchased with

the initial product purchase.
There are many other repair and calibration options available from the Keysight

Technologies support organization. These options cover a range of service

agreements with a variety of time frames. The following support products with

their associated options are available for purchase with the initial product

purchase.

— R1280A Return to Keysight Warranty and Service Plan

Options are available to extend the warranty period to five years.

— R1282A Return to Keysight Calibration Plan

The analyzer is delivered with a one-year calibration certificate. Options are

available to have Keysight Technologies provide three or five year

calibration coverage (perform the annual calibration two or four times).

Options for basic calibration or ISO/IEC 17025 or ANSI/NCSL Z540.3–2006

standards compliant calibrations are available. After calibration, the

analyzer will be returned with a calibration label, a calibration certificate,

and the calibration data.

— R1288A Return to Keysight On-Site Warranty and Service Plan

Same as R1280A, but the service is provided at the customer site.

— R1298A Return to Keysight On-Site Calibration Plan

Same as R1282A, but the service is provided at the customer site.

For more information on these and other service, please visit

https://service.keysight.com/infoline/public/default.aspx

or refer to

“Contacting Keysight” on page 2-7

. If the warranty or calibration plan period

has expired, these services are available on a per-incident basis. Visit this

InfoLine web site or contact Keysight to obtain a quote.

Contacting Keysight

Assistance with test and measurements needs and information or finding a

local Keysight office are available on the Web at:

http://www.keysight.com/find/assist

Содержание N5224A











































































































































































































































































































































































Результаты поиска

Содержание N5224A

Отзывы:

Похожие инструкции для N5224A

Бренды по названию

Популярные бренды

Keysight Technologies N5224A, Руководство по обслуживанию

Результаты поиска

Содержание N5224A

Отзывы:

Похожие инструкции для N5224A

Бренды по названию

Популярные бренды