Keysight Technologies B1507A, Руководство пользователя

Страница: 92 / 190

3- 14 Keysight B1507A User’s Guide, Edition 1
How To Perform Measurement
How To Perform I/V Measurement
LogDouble Logarithmic-sweep from the Start (sweep start value) to the
Stop (sweep stop value) and then return logarithmic-sweep
from the Stop to the Start
。
• Start
、
Stop
Enter the sweep start value in the Start and the sweep stop value in the Stop.
• Voltage Compliance
Enter the voltage compliance value in the Voltage Compliance.
If the output voltage of measurement unit connected to a drain terminal is more
than this value, a measurement unit stops the output.
By clicking the
Details
chevron, the area expands to set more detail conditions.
For more information on setting items, see “Setup” on page 4-38.
Step 5. Enter the setup conditions for the pulse output in General settings at the left side of
Setup area.
Auto Period Automatic adjustment for the pulse period.

To enable this function, mark the check box.
Pulse Period Pulse period.
However, if the Auto Period function is enabled, the pulse
period is automatically adjusted to a minimum period
corresponding to the pulse width.