Keysight Technologies B1507A, Руководство пользователя

Страница: 123 / 190

Keysight B1507A User’s Guide, Edition 1 4- 15
GUI Reference
Capacitance Measurement Software
Base/Gate drive
settings
Specify the output settings for the base-collector or gate-source voltage. You can set
them up depending on the types of the selected measurement: forcing the constant
bias voltage or sweeping the bias voltage.
Base/Gate Voltage Bias:
You can specify the following parameters to force the constant bias voltage.
• Bias
Specify the bias voltage.

Setting range:

100 V to +100 V
Base/Gate Voltage Sweep:
You can specify the following parameters to sweep the bias voltage.
• Start
Specify the sweep start value.

Setting range:

100 V to +100 V
• Stop
Specify the sweep stop value.

Setting range:

100 V to +100 V
• Sweep Mode
Select one from the following sweep modes.
• LinearSingle (Sweep from start to stop in a linear incremental step)
• LogSingle (Sweep from start to stop in a logarithmic incremental step)
• LinearDouble (Sweep from start to stop to start in a linear incremental step)
• LogDouble (Sweep from start to stop to start in a logarithmic incremental
step)
• Number of Step
Specify the number of sweep steps from start to stop.

Setting range: 1 to 1001
• Hold Time
Specify the hold time of the sweep start voltage. At the sweep start point, the
start voltage is forced for more than the specified time.

Setting range: 0 to 655.35 s
• Delay Time