Keysight Technologies B1507A, Руководство пользователя

Страница: 146 / 190

4- 38 Keysight B1507A User’s Guide, Edition 1
GUI Reference
I/V Measurement Software
Work Area
In this area, set the measurement conditions and observe the measurement results.
This is separated to the following areas.
• “Setup” on page 4-38
• “Characteristics” on page 4-52
• “Connections” on page 4-55
Setup
Figure 4-11 Setup
This is an area to select the device type and its measured I/V characteristics, and
enter your measurement conditions.
Device Type Select the device type of your DUT from below.
• MOSFET
• IGBT
• Diode
• Generic
Select the Generic to execute more general measurements for device other than
above types.
MOSFET You can select one of the following I/V characteristics measurements for
“MOSFET” device type.
• ID-VDS
Creates new settings to measure the output characteristics.
• ID-VGS
Creates new settings to measure the transfer characteristics.
• VGS(th)