![Kettler Berlin S2 Скачать руководство пользователя страница 21](http://html.mh-extra.com/html/kettler/berlin-s2/berlin-s2_manual_1959543021.webp)
21
– EN –
Trouble Shooting
– EN –
ERROR MESSAGE AND SOLUTION
Problem
Treadmill does not work
Belt does not run properly
Belt is slipping
P
ossible cause
a .no connect to power supply
b. safety switch not insert
c .cut off the signal circuit system
d. treadmill is not switch on
a .running belt not lubricate well
b . belt too tight
a. Band zu locker
b. Motorriemen zu locker
Corrective action
Plug into socket
Insert safety switch in monitor
Check control panel and signal cable
Switch on
Adjust running belt by silicon
Adjust running belt
Adjust running belt
Adjust the motor belt
Problem
Treadmill can not work
Treadmill stop suddenly
Taste defekt
E1
E2
E3
E5
E7
No puls
Console short of display
P
ossible cause
A : Did not connect the power supply
B: Safety key did not put well
C: transformer did not fix well or transformer
defected .
D: electrocircuit interrupt
A :safety key fall off
B: the electronic system problem
Key is damaged
Key can not work
A: Connect wire loose or defected
B: computer defected
C: Transformer defected
D: Controller defected
A: Motor connect wire or motor defected
B: The connect wire between the motor and
controller is loose or controller defected
A : speed sensor not well put
B: speed sensor defected
C: The connect wire between the speed sen-
sor and the controller did not connect well
D: controller defected
Controller defected
Motor defected
Computer can not test the safety key signal
Handle pulse wire did not connect well or
wire defected
Console circuitry defected
The screw on the PCB is loose
Console defected
Corrective action
Connect the power supply
Well put the safety key on the correct
position
Fix well the transformer or change the
transformer
Check the connect wire and the terminal
of the connect wire ,and well connect .
Put well the safety key .
Ask for the after sale service
Change key
Change key board and wire. Change pcb
board. Change computer.
Well connect the wire or Change the wire
Change the compuer
Change the transformer
Change the controller
Change the motor wire or change the
motor
Well connect the wire or change the con-
troller
Well put the speed sensor
Change the speed sensor
Well connect the wire
Change the controller
Change the controller
Change the motor
Check the safety key,and well put .
Well connect the wire or change the wire
Change the console
Tight well the screw
Change the console