18
7.11 IMPERIAL BODY FAT FUNCTION
When the treadmill stops, press the “PROG” key to select” FAT “and enter into body fat function. Left “SPEED” window displays the
set parameter, press “MODE” key to choose the item serial number; Right “DISTANCE” window displays the set item ,press “
＋
”
、
„-“
key to set the data.
A)
F1, means Sex, 1(male), 2(female). The original is Male
B)
F2, means Age, the range is 1-99, the default is 25.
C)
F3, means Height, the range is 39-87inch, the original is 67inch
D)
F4,means Weight, the range is 44-330 pound, the default is 154 pound
E)
F5, mean FAT, show you have finished the set item , and enter into body fat function, press two hands on the pulse pad, wait
4 seconds, and the item window will show your FAT. Take the Asian people for example, FAT under 18 is too thin; between
18-23 is standard; between 23-28 is fat; and over 29 is too fat. The default is 24.
HRC (Heart Rate Control)-PROGRAMS (optional):
1)
Function: The hand pulse sensors can detect the user’s actual heart rate and treadmill will adjust the speed to
increase/decrease user’s actual heart rate to reach the value of Pre-set Target Heart Rate. If user’s actual heart rate is lower
than the Pre-set Target Heart Rate, treadmill will increase the speed as step by step automatically till the actual user’s heart rate
reaches the Pre-set Target Heart Rate. If user’s actual heart rate is higher than the Pre-set Target Heart Rate, treadmill will lower
the speed as step by step automatically till the actual user’s heart rate reaches the Pre-set Target Heart Rate. There are 3
groups of default setting on HRC programs as Hr 1, Hr 2 and Hr 3 programs.
2)
Press “PROGRAM” button to select Hr 1 – Hr 3 while the treadmill is under standby mode, Press the “MODE” button to enter
the HRC program, the PULSE window will show “25” and blink which is default user age, you can adjust the user age by
pressing “+/-” buttons (Range : 13 - 80) then press “MODE” to confirm. The PULSE window will show the numbers of Pre-set
Target Heart Rate and blink that according to user age, you can adjust the pre-set target heart rate numbers if necessary then
press “MODE” button to confirm. The TIME window will show 30:00 and blink which is default exercise time, you can adjust
the exercise time by pressing “+/-” buttons (Range 5-99minutes) then press “MODE” button to confirm. Press “START” to start
the HRC program.
3)
Please firmly hold the hand pulse sensors when you are using the HRC programs.
**
WARNING : Please be aware that treadmill speed will be adjusted automatically in these HRC programs.
– EN –
