17
GB
7.3
：
Press “PROG” key to cycle select the program P0-P36, U1-U3, FAT
a)
“P0” User program. Press “MODE” cycle select four training mode. User can select the speed and incline. Speed default is
1.0km/h. Incline default is 0%.
Training mode 1
：
Counting. Time, speed, distance calorie is plus. The select function is closed
Training mode 2
：
Time Countdown. Under selecting, time window flicker, press “
＋
” “-” to select. The range is 5-99 minute.
Default is 30
：
00.
Training mode 3
：
Distance Countdown. Under selecting, distance window flicker, press “
＋
” “-”to select. The range is 1.0-
99.0km. Default is1.0KM..
Training mode 4
：
Calories Countdown. Under selecting, calories window flicker, press “
＋
” “-” to select. The range is 20-
990CAL. Default is 50CAL.
b)
“ P1 - P36 ” Preset program. Only for time countdown. Under selecting, time window flicker, press “
＋
”“-”to select. The range
is 5-99 minute. Default is 30
：
00. Press “MODE” to return to default value.
7.4
：
Press the start key, the speed window will display 5
→
4
→
3
→
2
→
1, with 5 tones, then the treadmill will run, and slowly
increase the speed to what is displayed.
a)
When running, press the“
＋
” “-”and “quick speed” key to adjust the speed you want.
b)
For P1-P36, Speed divide into 10 segments. Each segment have same time. The speed after selecting will be avail in current
segment. When run to next segment, it will sound 3 times in advance. When finish 10 segments, the motor will stop with a
long prompt sound.
c)
Press “START” key when running, it will pause. Press “START” key again, it will running, the record data will keep on.
7.5
：
Press “STOP” key when running, the treadmill will slowly till stop. All will return to the default state.
7.6
：
Press
or“ QUICK INCLINE” key when the tread ill is running, you cann adjust the inclination.
7.7
：
In any state, pull-out safety locks, window displays
：
Er-7and sound buzzer. The treadmill stops.
7.8
：
The controller always under the inspection. Treadmill will stop once the abnormal case happen. Window will show the ERR
message and sound.
7.9
：
When the window showing the ERR message, press “stop” key, the ERR message will be deleted.
7.10 BODY FAT FUNCTION
：
When the treadmill stops, press the “PROG” key to select” FAT “and enter into body fat function. Left “SPEED” window displays the
set parameter, press “MODE” key to choose the item serial number; Right “DISTANCE” window displays the set item ,press “
＋
”
、
“
”key to set the data.
A)
F1, means Sex, 1(male), 2(female). The original is Male
B)
F2, means Age, the range is 1-99, the default is 25.
C)
F3, means Height, the range is 100-220CM, the original is 170CM
D)
F4,means Weight, the range is 20-150KG, the default is 70KG
E)
F5, mean FAT, shows you have finished the set item , and enter into body fat function, press two hands on the pulse pad, wait
8 seconds, and the item window will show your FAT. Take the Asian people for example, FAT under 18 is too thin; between
18-23 is standard; between 23-28 is fat; and over 29 is too fat. The default is 24.
– EN –
