Kett FD-720, Руководство по эксплуатации

Страница: 55 / 68

55
12-2-3 Obtaining predicted measurements
Operating instructions
Set the mode to predictive measuring mode. (9-2-2 “7) Specifying settings for
PREDICT (Predictive measuring) mode” on p. 33 for instructions.)
Specify the same settings for the predicted value convergence range and
drying temperature as those used in comparative measuring mode
(subsections 12-2-1 and 12-2-2).
Example:
Predicted value convergence range:
0.5%
Drying temperature: 120
°
C
Use the bias calculated following the procedures described in 12-2-1 and 12-2-
2 to specify the bias (shown here as 0.60%). (Also see “9-2-4 Bias” on p. 35.)
Place the sample onto the sample dish and begin measurement. (In the
example shown here, the initial weight is 10.213 grams.)
Completion of measurement
The predicted measurement will then be displayed.
Step
1
2
3
4
5
. . . . .
Display