Kett FD-720, Руководство по эксплуатации

Страница: 45 / 68

45
10-2-6 Specifying a device ID
This section describes how to specify the device ID output when outputting data to a printer or
computer. The device ID is an 8-character ID which may be set using the following characters:
digits from 0~9, letters from A~Z, and hyphens (i.e., ‘—’).
How to specify a device ID
Key(s) used Operating instructions
From the weight display, press the key and hold the
key down while pressing the key.
The first through fourth characters of the device ID will be
displayed with the first character flashing. The indicator ‘id’ will be
displayed in the center of the display.
Press the key or key to select the desired character
(i.e., a digit from 0~9, a letter from A~Z, or a hyphen). Note that
here the letter ‘A’ has been selected.
When the desired character is displayed, press the key.
The first character will then have been specified and the second
character will begin to flash.
Repeat steps
3
and
4
until the fourth character has been
specified. Note that here a value of ‘ABCD’ has been specified.
When the fourth character has been specified, press the
key.
The fifth through eighth characters of the device ID will then be
displayed with the first of the four characters flashing.
Just as with the first four characters, repeat steps
3
and
4
until
the eighth character has been specified. Note that here a value of
‘—123’ has been specified.
When the eighth character has been specified, press the
key. This will complete the setting of the device ID, and the
display will return to the standard weight display.
Step
1
2
3
4
5
6
7
8
Display