Kett FD-720, Руководство по эксплуатации

Страница: 62 / 68

62
14-3 Computer Output Format
Interface type : RS232C
Numeric output format : JIS (ASCII)
Delimiter code : 0x09 (tab)
Delimiter : 0x0D (CR) + 0x0A(LF)
Title output format at time of start of measurement
(Underscore characters (i.e., ‘_’) are used below to indicate blanks (i.e., ‘20’ in hexadecimal)
1 “KETT_ELECTRIC_LABORATORY” + delimiter
2 “_Model_:_FD720” + delimiter
3 “_SN_:_” + “XXXXXXX” (7-byte Serial No.) + delimiter
4 “_ID_:_” + “XXXXXXXX” (8-byte ID) + delimiter
5 “_Date/Time_:_” + “XX” (2-byte year) + “.” + “XX” (2-byte month) + “.” + “XX” (2-byte day) + “/”
+ “XX” (2-byte hour) + “:” + “XX” (2-byte minutes) + delimiter
6 “_Condition_:_” + “X” (1-byte condition number) + delimiter
7 “_Unit_:_” + “Wet Base Moist.” or “Dry Base Moist.” or “Solid Content” + delimiter
8-
1
Automatic halting format
“_Mode_:_Auto” + delimiter
“_Setting Temp._:_” + “XXX” (3-byte temperature setting) + “C” + delimiter
“_Auto Stop Cond._:_” + “X.XX” (4-byte automatic halting conditions setting) + “%” +
delim iter
8-
2
Timed halting format
“_Mode_:_Time” + delimiter
“_Setting_Temp._:_” + “XXX” (3-byte temperature setting) + “C” + delimiter
“_Drying_Time_:_” + “XXX” (3-byte drying time setting) + “min.” + delimiter
8-
3
High-speed drying format
“_Mode_:_Rapid” + delimiter
“_Setting_Temp._:_” + “XXX” (3-byte temperature setting) + “C” + delimiter
Automatic halting: “_Auto Stop Cond._:_” + “X.XX” (4-byte automatic halting conditions
setting) + “%” + delimiter
Timed halting: “_Drying Time_:_” + “XXX” (3-byte drying time setting) + “min.” + delimiter
“_Max_Temp._:_” + “XXX” (3-byte of high-speed drying temperature) + “C” + delimiter
“_Delta M_:_” + “X.X” (3-byte of degree of high-speed drying maintenace condition) +
delimiter
8-
4
Low-speed drying format
“_Mode_:_Slow” + delimiter
“_Setting Temp._:_” + “XXX” (3-byte temperature setting) + “C” + delimiter
Automatic halting: “_Auto Stop Cond._:_” + “X.XX” (4-byte automatic halting conditions
setting) + “%” + delimiter
Timed halting: “_Drying Time_:_” + “XXX” (3-byte drying time setting) + “min.” + delimiter