
5
TK-5710
(
B
)
/5710H
(
B
)
REALIGNMENT
1. Modes
2. How to Enter Each Mode
Mode
Operation
User mode
Power ON
Panel test mode
[PF1] + Power ON
PC mode
Received commands from PC
Panel tuning mode
[Panel test mode] + [GRP^]
Firmware programming mode
[PF2] + Power ON
Clone mode
[PF5] + Power ON
Self programming mode
[GRP^] + Power ON
Firmware version information
[PF3] + Power ON
Clock adjustment mode
[PF4] + Power ON
3. Panel Test Mode
Setting method refer to ADJUSTMENT.
4. Panel Tuning Mode
Setting method refer to ADJUSTMENT.
5. PC Mode
5-1. Preface
The transceiver is programmed by using a personal com-
puter, programming interface (KPG-43) and programming
software (KPG-95D).
The programming software can be used with an IBM PC
or compatible. Figure 1 shows the setup of an IBM PC for
programming.
User mode
Panel test mode
Firmware version information
Panel tuning mode
Data programming mode
PC test mode
PC tuning mode
PC mode
Clone mode
Firmware
programming mode
Clock adjustment mode
Self programming mode
Mode
Function
User mode
For normal use.
Panel test mode
Used by the dealer to check the fundamen-
tal characteristics.
Panel tuning mode
Used by the dealer to tune the transceiver.
PC mode
Used for communication between the
transceiver and PC (IBM compatible).
Data programming
Used to read and write frequency data and
mode
other features to and from the transceiver.
PC test mode
Used to check the transceiver using the PC.
This feature is included in the FPU.
See panel tuning.
Firmware
Used when changing the main program of
programming mode
the flash memory.
Clone mode
Used to transfer programming data from
one transceiver to another.
Self programming
You can program the frequency,
mode
signaling and other functions using only the
transceiver.
Firmware version
Used to confirm the internal firmware
information
version.
Clock adjustment
Used by the dealer to adjust date and time.
mode
Fig. 1
IBM-PC
KPG-43
KPG-95D
5-2. Connection procedure
1. Connect the transceiver to the personal computer with
the interface cable.
2. When the POWER switch on, user mode can be entered
immediately. When PC sends command the transceiver
enter PC mode, and “PROGRAM” is displayed on the
LCD.
When data transmitting from transceiver, the red LED is
lights.