Kentrox RMX-3200, Руководство по настройке

Страница: 62 / 388

Remote RMX-3200 Version 5.2x Configuration Guide
Configuring Network Setup Parameters: Configuring SNMP
5-14
3. Configure an IPv6 management station for version 2 inform requests:
config snmp host fd10:39:0:0:200 162 public v2-inform
4. Enable the sending of authentication traps:
config snmp auth-trap enable
5. Enable the SNMP trap queue:
config snmp trap-queue enable

Notes: The
queuing
state occurs on an SNMP host when a ping fails and traps are
waiting to be sent. The
sending
state occurs on an SNMP host for all other
conditions related to trap queuing.

Trap queuing is always enabled for
v2-inform
type hosts, however ping is
not used. Instead, the oldest request in the queue is retried until a response
is received.
6. Assign a
high
priority for a linkDown trap with OID
.1.3.6.1.6.3.1.1.5.3
:
config snmp trap-queue priority .1.3.6.1.6.3.1.1.5.3 high
7. (optional) Verify that SNMP has been configured properly:
show snmp summary
The command response similar to the following displays:
8. Save the configuration.
(Dub)>show snmp summary
Authentication traps: enabled
Trap queue: enabled
Communities:
Name User Type Auth Mode
administrator v1 noauth readwrite
public v1 noauth readonly
V3 Users:
Username Auth Priv
Hosts:
IP Address Port Type Auth Community/User Queue
10.34.3.84 162 v1 noauth public sending
fd10::39:0:0:200
162 v2-inform noauth public sending
Priority:
Trap OID Priority
.1.3.6.1.6.3.1.1.5.3 high
(Dub)>