Kentrox RMX-3200, Руководство по настройке

Страница: 59 / 388

Remote RMX-3200 Version 5.2x Configuration Guide
Configuring Network Setup Parameters: Configuring RAS Settings
5-11
Configuring RAS Settings
To configure RAS settings:
1. At the main prompt, configure the RAS server type as with
fallback
enabled:
config ras shell fallback

Note: A message displays indicating that the shell type configuration will not
take effect until the server is configured.
2. Configure the primary RAS server with the following settings:

IP address
10.50.18.32
 Port
100

Secret
tserver1
 Phases
accounting
,
authentication
and
authorization
:
config ras server 10.50.18.32 port 100
config ras server 10.50.18.32 secret tserver1
config ras server 10.50.18.32 phase accounting authentication
authorization
3. Enable RAS accounting:
config ras accounting enable
4. Configure
privilege
level RAS authorization:
config ras authorization privilege

Note: RAS accounting and authorization take effect only when is
configured as the server type.
In this scenario, you will:

Configure the RAS server type
 Configure the RAS server address and settings

Enable RAS accounting
 Configure the RAS authorization mode

Configure the number of times Remote RMX-3200 attempts to connect to the
RAS server
 Configure the RAS timeout period for a remote authentication attempt