Kentrox RMX-3200, Руководство по настройке

Страница: 263 / 388

Remote RMX-3200 Version 5.2x Configuration Guide
Configuring Jobs: Configuring a Job with a Job Task
23-11
7. Assign the task property
port
as
50008
,
ifconfig
as
new_ip
,
type
as
STREAM
and
listen
as
5
to task
server_sock
:
config jobs name echodata task server_sock property port 50008
config jobs name echodata task server_sock property ifconfig
new_ip
config jobs name echodata task server_sock property type STREAM
config jobs name echodata task server_sock property listen 5
8. (optional) Verify that the task
server_sock
has been configured properly:
show jobs name echodata task server_sock
The command response similar to the following displays:
9. Enable capture output for job
echodata
:
config jobs name echodata capture
10. Configure job
echodata
with the job property
upper_case
and assign it with the
value of
yes
:
config jobs name echodata property upper_case yes
11. (optional) Verify that job
echodata
has been configured with the proper job
properly:
show jobs name echodata properties
The command response similar to the following displays:
12. Save the configuration.
13. Run job
echodata
:
exec-job echodata run
A run ID is assigned.
(Dub)>show jobs name echodata task server_sock
Task: server_sock
Position: 2
Type: serversocket
Properties:
Name Value
address 10.40.57.50
ifconfig new_ip
listen 5
port 50008
type STREAM
(Dub)>
(Dub)>show jobs name echodata properties
Name Value
upper_case yes
(Dub)>