background image

Remote RMX-3200 Version 5.2x Configuration Guide

Configuring Event Correlations: Overview

14-2

Overview

Event correlation is the ability to identify a unique condition by comparing the states of 
multiple events and aggregating

 

into a single event.

The goals of Remote RMX-3200 event correlation are to:

Report the correlated condition to a network management system

Include the correlated condition as an individual component in other event 
correlations (if defined)

Perform an automatic response (if defined)

Event Correlation Components

Event correlation is represented by an event originator named 

correlation 

and the 

following components:

A description of the event correlation

boolean

-like expression to define the event correlation

Properties controlling how the expression is evaluated. The evaluation of the 
correlation expression results in a true or false state for the event correlation.

Содержание RMX-3200





































































































































































































































































































































































































Отзывы: