Kentrox RMX-3200, Руководство по настройке

Страница: 197 / 388

Remote RMX-3200 Version 5.2x Configuration Guide
Configuring and Connecting TL1 Infrastructure: Configuring the TCP Port for a TL1 Multiplexer
18-5
Configuring the TCP Port for a TL1 Multiplexer
To configure an incoming TCP connection to connect to a TL1 multiplexer using
events, responses and actions:
1. At the main prompt, configure event
ossConnection
with originator as
tcp 40002
and event type as
incoming-connection
:
config event ossConnection content tcp 40002 incoming-connection
2. Configure response
connectToMux2
with the responder as
tcp 40002
and with
the response type as
connect
. The destination is
tl1mux 2
:
config response connectToMux2 content tcp 40002 connect dest
tl1mux 2
3. Configure action
ossToMux
with event
ossConnection
and response
connectToMux2
:
config action ossToMux event ossConnection response connectToMux2
4. (optional) Verify that action
ossToMux
has been configured properly:
show actions ossToMux
The command response similar to the following displays:
5. Save the configuration.
In this scenario, you will:

Configure an event that matches an incoming TCP connection on TCP port
40002

Configure a response that connects the incoming TCP connection to a TL1
multiplexer

Configure an action that associates the event with the response. When Remote
RMX-3200 receives the incoming TCP connection, the action connects it to the
TL1 multiplexer.
(Dub)>show actions ossToMux
Action Name : ossToMux
Action Description :
Event Name : ossConnection
Event Description :
Event Originator : tcp 40002
Event Type : incoming-connection
Response Name : connectToMux2
Response Description :
Response Responder : tcp 40002
Response Type : connect
Response Parameters :
dest=tl1mux 2
(Dub)>