Kentrox RMX-3200, Руководство по настройке

Страница: 53 / 388

Remote RMX-3200 Version 5.2x Configuration Guide
Configuring Network Setup Parameters: Configuring NTP
5-5
Configuring NTP
To configure system clock parameters using the common clock time maintained by
the Remote RMX-3200 NTP server:
1. At the main prompt, configure the preferred NTP server with IP address
10.50.18.32
:
config ntp server 10.50.18.32
Tip: The first server configured becomes the preferred server and the second
server configured becomes the secondary server, unless indicated
otherwise by entering
prefer
as in step 2 .
2. Configure the second NTP server with IP address
10.50.18.33
and set it as the
preferred server:
config ntp server 10.50.18.33 prefer
3. Define the minimum NTP polling interval as
7
(128 seconds) and maximum NTP
polling interval as
12
(4096 seconds):
config ntp poll-interval 7 12
Tip: The value for the interval is 2 raised to the power of the value entered.
4. Enable NTP on Remote RMX-3200:
config ntp enable
In this scenario, you will:

Configure a primary and secondary NTP server
 Configure a minimum and maximum NTP polling interval

Enable NTP