Kentrox RMX-3200, Руководство по настройке

Страница: 214 / 388

Remote RMX-3200 Version 5.2x Configuration Guide
Configuring Relay Outputs: Configuring TL1 Commands to Control a Relay Output
20-4
Configuring TL1 Commands to Control a Relay Output
To configureTL1 commands to control relay outputs:
1. At the main prompt, configure event
fanOnCmd
with originator
tl1ne 2
and event
type
tl1cmd-rcvd
with command
fanOn
:
config event fanOnCmd content tl1ne 2 tl1cmd-rcvd fanOn
2. At the main prompt, configure event
fanOffCmd
with originator
tl1ne 2
and event
type
tl1cmd-rcvd
with command
fanOff
:
config event fanOffCmd content tl1ne 2 tl1cmd-rcvd fanOff
3. (optional) At the main prompt, add description
Fan control
to
discrete output
0/1
:
config discrete output 0/1 description Fan control
4. Configure response
fanOnReponse
with responder
output 0/1
and response
type
close
:
config response fanOnResponse content output 0/1 close
5. Configure response
fanOffReponse
with responder
output 0/1
and response
type
open
:
config response fanOffResponse content output 0/1 open
6. Configure action
fanOnAction
with the event
fanOnCmd
and response
fanOnResponse
:
config action fanOnAction event fanOnCmd response fanOnResponse
7. Configure action
fanOffAction
with the event
fanOffCmd
and response
fanOffResponse
:
config action fanOffAction event fanOffCmd response fanOffResponse
In this scenario, you will:

Configure event s that occur when specific TL1 commands are received on a
virtual TL1 NE
 Configure response s that open and close a relay output

Configure action s that associate the events with the responses.