Kentrox RMX-3200, Руководство по настройке

Страница: 58 / 388

Remote RMX-3200 Version 5.2x Configuration Guide
Configuring Network Setup Parameters: Configuring System Clock Settings
5-10
Configuring a Timezone Definition File
You can load and apply daylight savings rules to your system from a timezone
definition file. A timezone definition file is derived from the public domain timezone
database and consists of:
 Zone entries, which identify the available timezones with their GMT offsets
and any applicable rules

Rules, which define valid date and time ranges and the amount of time saved.
To configure a time zone definition file:
1. Establish an FTP connection into the system and upload the definition file from
your local workstation. A new directory will be added under the
config
directory
with a single file named
timezones.def
.
2. At the
config clock
prompt, apply the installed timezone definition file:
config clock timezone from-file EST
3. (optional) Verify that the clock parameters have been configured properly:
show clock
The command response similar to the following displays:
4. Save the configuration.
In this scenario, you will:

Install the timezone definition file
 Apply daylight savings rules from the timezone definition file
(Dub)>show
(Dub) show>clock
Fri Apr 9 14:18:24 EST 2010
Uptime 9 days, 17:48
The timezone is named EST and has an offset of -05:00 GMT.
Daylight savings time is currently active and is saving 01:00.
These settings were loaded from the timezone definition file.
(Dub) show>