Kentrox RMX-3200, Руководство по настройке

Страница: 310 / 388

Remote RMX-3200 Version 5.2x Configuration Guide
Using Configuration Wizards: Using the initsetup Wizard
26-4
5. (optional) Select (y/N) to add login accounts.

If yes, select whether or not to require strong passwords.
 Enter the desired login name and password. If strong passwords are required,
the password must be from 8 to 20 characters and contain at one upper-case,
lower-case and special punctuation character.

Select the desired user profile: 1) supervisor, 2) management, or 3) status.
 Select (y/N) whether to add another user
6. If a wireless modem card or T1/E1 WAN card is installed, you will be prompted
whether to configure the WAN connection. The following settings are configurable
and are for wireless modem cards only:
 Wireless service provider

Access point name
 PPP authentication method

Remote server if used as default route
7. Enter the desired default route when prompted.
8. (optional) Select (y/N) to configure DHCP.
 If yes, select the IP address for the DHCP router. Enter 1 to not use the device
IP address (default) or 2 to use the device IP address
Enter the desired DHCP server settings when prompted. The following settings
are configurable:
 DHCP router IP address

Subnet mask or mask length
 The lowest address to serve

The number of addresses to serve
9. (optional) Enter the desired clock settings when prompted. The following settings
are configurable:

The standard timezone
 Daylight savings time

The current time and date
10. (optional) Enter the desired NTP settings when prompted. The wizard asks you
for the primary and secondary server IP addresses.