KEB COMBIVERT F4-S/1.2, Руководство по применению, Страница: 12 / 96

Parameter Structure
12
Analog In- and
Outputs
(An -Parameter)
Digital Inputs
(di-Parameter)
Digital
Outputs
(do-Parameter)
Operating
Point of Digital
Outputs
(LE-Parameter)
Control Terminal
I / O - Functions
User Interface
Operating
Display
(ru -Parameter)
Programming
of parameter
sets
(Fr-Parameter)
Programming
of Operator
Surface
(ud-Parameter)
Inverter
Characteristics
(In - Parameter)
User
Defined
Parameter
(CP-Parameter)
Slip and Torque
Compensation
(cn-Parameter)
Inverter Functions
Motor
(dr - Parameter)
Protect- and
Keep on
Running
Functions
(Pn - Parameter)
U/F - Curve
Modulator
( uF - Parameter )
Ramp
Generator
and
S-Curves
Sepoint
Calculation
and
Limitation
(op - Parameter)
There are 4 programmable parameters (parameter sets 0-3) and for each
programmable parameter up to 4 different values can be stored. The values of the
actual set selected are always active. Sets can be switched between during operation.
This switching is done via terminal strip, keyboard or bus interface.
Example: REF SOURCE (op.0) is programmed in all sets with 2
(frequency reference s/- Digital-Abs).
REF SETTING ABS (oP.1) has the following value in sets 0 - 3:
Set 0: 0 Hz
Set 1: 10 Hz
Set 2: 20 Hz
Set 3: 30 Hz
Depending on the set chosen the set value is 10, 20 or 30 Hz.
For all non-programmable parameters the same value is valid regardless of the set
selected.
Functions of the
Parameter Groups
Parameter Sets