KAYO MOTOR AU200, Руководство по обслуживанию

Страница: 71 / 138

浙江华洋赛车股份有限公司
5- 15
5.4.5Float height adjustment
First measure the height of the float with an
altimeter
Float height
：
15 ± 1 mm
When you need to adjust the height of the
float, slowly change the angle of the float
arm until the tip of the float arm just touches
the float needle. You can also adjust the
height of the float on the float height
detector.
5.4.6Throttle valve plunger
assembly
First install the retaining ring in the groove
of the oil needle
Standard positioning position: third ring
groove
Then insert the oil needle into the plunger
and attach the retaining ring. Then, insert the
plunger spring into the end of the throttle
line. Connect the steering line to the throttle
valve plunger.
Idle speed adjustment screw
Float
Float Pin
Foam tube
Idle fine-tuning
screw
Plunger trimming screw
Retaining Ring