KAYO MOTOR AU200, Руководство по обслуживанию

Страница: 43 / 138

浙江华洋赛车股份有限公司
3- 11
3.4 wheel
Lift the front wheel with the tool in the
horizontal position, make sure that the car
body has no force on the wheel, shake the
front wheel from side to side, check whether
the front wheel connection is firm, check for
shaking.
If there is any shaking, check and tighten the
rocker arm, axle, rim bolt, nut.
If there is still shaking, check and replace:
bearing, rocker buffer sleeve, ball pin.
Front wheel size
The vehicle body is placed in a horizontal
position, and the toe size of the wheel is
measured; the front of the wheel with
respect to the forward direction of the
vehicle is: A, and the rear of the wheel is: B
Toe size: A-B=1.5 ~ 2.5mm
F is the way forward
If not in this range, adjust the lock nut2 of
the steering rod 1
Note: After the front beam size is adjusted,
drive the vehicle slowly and make sure
that the handlebar can correctly control
the direction of the motor body
.
F
1
2