KAYO MOTOR AU200, Руководство по обслуживанию

Страница: 125 / 138

浙江华洋赛车股份有限公司
6- 13
steering system
Steering shaft assembly
Disassembly
Remove the meter cover
Remove the front assembly board
Remove the front wheel
Remove the direction to remove the tube
Remove the rear brake parking handle
combination
Remove the hydraulic brake hand brake
pump
Remove the tube and the left and right
handles
Loosen the lock nut on the steering rod 1
( left and right)
Remove the steering lever 2
Remove the steering rocker (1 set for left
and right)
Remove the fixing bolts 3
Remove the clamp plate 4
Remove the clamp 5
Remove the split pin 6
Remove the lock nut 7
The steering shaft assembly can be removed
by lifting the steering shaft upwards
Installation
Installation in reverse order of disassembly
Note: When installing the split pin, replace
the new split pin; after the installation is
completed, check the steering flexibility and
the left and right steering angles are the
same; cable and cable type cable according
to the first chapter cable, cable type cable;
When turning the rocker arm, be sure to
place the steering rocker arm in the center
and then assemble the steering shaft. When
assembling the steering shaft, be sure to
assemble it patiently. Make sure that the
right and left steering angles are the same,
4
6
5
1
2
3