KAYO MOTOR AU200, Руководство по обслуживанию

Страница: 47 / 138

浙江华洋赛车股份有限公司
3- 15
3.7 Throttle check
Check the free stroke of the throttle button 1
Clearance: 2 ~ 6 mm
Adjust the clearance when the clearance is
not within the specified range
Remove the sheath 3
Release the throttle cable lock nut 2
Turn the adjuster to adjust the free travel of
the throttle button
After adjustment, tighten the lock nut 2 to
install the throttle cable sheath 3
If the adjustment regulator still does not
reach the specified clearance or the
movement is still not flexible, replace the
new throttle cable.
Speed limit device adjustment
The speed limit device is used to limit the
opening of the throttle
Check the thread limit length of the speed
limit screw 4,
Thread limit length: a = 12mm
Adjustment method
Loosen the lock nut
Adjust with a Phillips screwdriver
Note: For beginners, the speed limit
device should be in a tightened state, and
the speed limit device can be used to
change the throttle size after the
technology reaches a certain level.
In addition, 12mm is the limit length of
the speed limit device thread. Generally,
this length is only adjusted to 3mm~5mm.
1
3
2
4