KAYO MOTOR AU200, Руководство по обслуживанию

Страница: 68 / 138

5
发动机
12
started until the pressure gauge stops rising.
The maximum reading usually arrives after 4
to 6 starts.
Cylinder compression force
：
1450 ± 145kPa
5.4 Fuel System
Maintenance instructions……………………………………………………………………5-12
5.4.1 trouble clearing………………………………………………………………………5-12
5.4.2 Carburetor disassembly………………………………………………………………5-13
5.4.3 Throttle plunger………………………………………………………………………5-13
5.4.4 Float, float needle, nozzle……………………………………………………………5-14
5.4.5 Float height adjustment………………………………………………………………5-15
5.4.6 Throttle plunger assembly……………………………………………………………5-15
5.4.7 Carburetor installation…………………………………………………………………5-16
5.4.8 Air conditioning screw adjustment……………………………………………………5-16
Maintenance instructions
1. When using gasoline, special care should be taken. Always remember to carry out in a
well-ventilated environment in the air, and keep away from sparks and flames;
2. When disassembling all parts of the fuel system, pay attention to the installation position of the
“
O
”
ring. When reassembling, it must be replaced with a new
“
O
”
ring;
The oil drain screw at the lower end of the float chamber can loosen the screw and drain the
gasoline remaining in the float chamber.
5.4.1
trouble clearing