KAYO MOTOR AU200, Руководство по обслуживанию

Страница: 39 / 138

浙江华洋赛车股份有限公司
3- 7
Front brake pump combination
<liquid quantity>
Check the amount of brake fluid
Check the brake fluid volume through the
observation hole 4. When the brake fluid
volume decreases to the vicinity of the lower
limit line 2 (LOWER), the vehicle will not
be able to continue to use at this time, and it
is necessary to check the brake pump, the
brake pipe and the leakage at each joint. If
the inspection is normal, you need to check
the wear of the brake disc and the brake
pads. Replace if it is damaged or worn
below the limit of use.
Inspection of these items is also required
before each use of the vehicle.
Remove the 2 vent screws 1
Remove the oil cup cover 3
Add the brake fluid recommended by
Huayang until the upper limit line
Note
Do not mix dust and water when
replenishing brake fluid
To prevent chemical changes, use a
specified grade of brake fluid.
Because the brake fluid will damage the
plastic surface and rubber surface, please do
not splash it on these parts.
Turn the direction handle slightly to the left
and right, and remove the oil cup cover after
the brake pump combination is in the
horizontal state.
1, exhaust screw
2, the lower limit line
3, oil cup cover
4, observation hole
1
2
3
4