KAYO MOTOR AU200, Руководство по обслуживанию

Страница: 63 / 138

浙江华洋赛车股份有限公司
7
5.2.3 Lubricating oil inspection
Park the motorcycle on a flat surface and check the
amount of oil with a dipstick 1. If the oil level is lower
than the lower score line, the recommended lubricant
should be replenished to fill the upper line.
5.2.4 Lubricating oil replacement
When changing the oil, it should be done before
the engine is warm and not cooled. This will ensure that
the oil in the tank is quickly and completely removed.
When replacing, turn on the oil filter cover 2 (bottom of
the crankcase), remove the spring and filter, release the
oil in the crankcase, and then unscrew the gearbox drain
screw 3 to get out the oil in the gearbox
5.2.5 Lubricating oil filter cleaning
Clean the filter with a detergent. Install the filter and
spring, install the filter cover, and tighten according to
the specified torque value. Add new lubricant from the
fill port (0.9 L crankcase, 0.4 L gearbox)
Install the screw plug with the dipstick. Then, the engine
was started to operate after idling for 45 minutes and
then stopped. Then, keep the body
flat and check the oil level of the oil
dipstick. At this time, the oil level
must reach the lower line and check
for oil leakage.
4
：
Transmission case oil hole sealing
screw plug
1
2
3