KAYO MOTOR AU200, Руководство по обслуживанию

Страница: 116 / 138

6 车辆底盘
6- 4
6.1 Troubleshooting
Steering is too heavy
1. The upper bolt of the direction
column is too tight
2. Steering bearing damage and wear
3, the inner and outer races of the
bearing are damaged, worn, and stepped
4, the direction column deformation
5, low tire pressure
6, tire worn out
Second, the handle bar is shaking
1. Steering bearing damage and poor
fastening
2, left and right shock absorbers are
not supported
3, tire skew
4, frame deformation
5, tire eccentric worn out
6, wheel bearing shaking
Third, the front wheel is jumping
1, rim deformation
2, poor wheel bearing
3, bad tires
4, improper wheel balance
5, poor fastening around the wheel
axle
Fourth, the wheel is not turning well
1, poor wheel bearing
2. Improper installation of the front
wheels
3, brake tubing, cable clamp
Fifth, the front suspension is too soft
1. The front shock absorber is
weakened
2, the tire pressure is too low
Sixth, the front suspension is too hard
1. The front shock absorber is
damaged.
2, the tire pressure is too high
Seven, the front shock absorber
abnormal sound
1. The front shock absorber is
defective
2. Loose parts of the shock absorber
are loose
Eight, poor braking effect
1, poor brake adjustment
2, the surface of the brake disc is
defaced
3, brake pad wear
6.2 Front wheel
Disassembly
Raise the front wheel with a tool to ensure
that no force is applied to the front wheel
Remove the four nuts that are attached to the
front wheel bracket 1
Remove
the front wheel 2
Open ratchet wrench s24 Socket wrench m24
Phillips screwdriver Needle-nose pliers
Flat mouth screwdriver External circlip pliers
hammer
2
1