manualshive.com logo in svg

Kathrein UFS 910, Руководство по эксплуатации

Поделиться
Скачать
Kathrein UFS 910 Скачать руководство пользователя страница 76

76

USING THE FRONT PANEL

If you have misplaced your remote control, or if the batteries are fl at, you can still operate your receiver 
from the front panel.

BACKUP OPERATION

Because there are no number buttons, no password/PIN-protected functions can be 
displayed.

The front panel houses four buttons and the multifunction control (from now on referred to as “the control”).

V-format button:

Pressing the “V-format” button allows you to select from the 576p, 720p and 1080i picture formats.

Menu button:

Press the Menu button to access the main menu. Move to the various sub-menu items by rotating the 
control. Select the sub-menus by pressing the middle of the control. Press the Menu button to exit the 
selected menu and save your changes. Press the Exit button to quit the menu.

Option button:

Press the option button to access the sound options menu. Make the selection for the programme you 
want to view by rotating the control and confi rm the selection by pressing the middle of the control.

Stop/Exit button:

This is used for quitting the on-screen display and for cancelling procedures

Multifunction control:

-  Rotate the control to switch channels.
-  Press the control button twice to switch between TV and radio reception.
-  Press and hold down the control button to switch the receiver to Standby mode.
 
 

Tap the control button to restart the receiver.

Содержание UFS 910

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды