Kathrein UFS 910, Руководство по эксплуатации

Страница: 47 / 88

47
Use the buttons to switch to the selection fi eld “End” and use the buttons to select the
desired recording fi nishing time.
When all settings have been made, press the button to save the recording settings. You can view the
scheduled recording in the recording schedule view of the EPG (see item “Recording schedule”).
SERIES RECORDING
Use the buttons to select the recording mode “Series recording”.
In series recording the start and fi nish of recording are taken automatically by the receiver from the EPG
data. You can only specify a lead-in and run-out time to be sure to record the complete programme even if
transmission times may vary slightly. The setting of lead-in and run-out time is done using the buttons
or the keypad.
When all settings have been made, press the button to save the recording settings. You can view the
scheduled recordings in the recording schedule view of the EPG (see item “Recording schedule”).
Series recording depends on the EPG data being kept up to date at all times. The
receiver automatically updates the EPG data when the unit is switched off by pressing
the button. Updating is important because it enables the receiver to recognise for
purposes of recording any changes to scheduled transmission times of the series,
provided these were incorporated in the EPG data supplied by the channel provider in
advance of the latest EPG update.
EPG - ELECTRONIC PROGRAMME GUIDE