Kathrein UFS 910, Руководство по эксплуатации

Страница: 23 / 88

23
FIRST INSTALLATION: Single-cable system (automatic)
The receiver searches for the transmission channels
on your single-cable system and shows in the next
display the available transmission channels.
Use the buttons to select the transmission
channel you want and confi rm the selection with
the button.
The receiver now reads the existing system data
for your single-cable system and confi gures itself.
The receiver has been successfully registered on
your single-cable system. Confi rm the display with
the button. Now press the
!
(green) button. The
receiver will automatically display the menu for the
channel search. Continue with the section
(Execute channel search).
If no connection to the single-cable system could be established, you will receive the message
“Registration was abortive!”. Check your settings and if necessary call for expert help.
If one or more receivers are already present on the system and an additional receiver
is to be connected, when assigning the transmission frequency for the new receiver
make sure that no transmission frequencies are duplicated.
No frequency can be used by more than one receiver.
No frequency can be used by more
than one receiver.
The receivers would interfere with
each other.