manualshive.com logo in svg

Kathrein UFS 910, Руководство по эксплуатации

Поделиться
Скачать
Kathrein UFS 910 Скачать руководство пользователя страница 63

63

Transponder frequency

Use the 

 buttons (transponder frequency already saved) or the keypad (transponder frequency 

not yet saved) to select the transponder frequency on which the channel being sought is transmitted. 
At the bottom right of the screen display, the receiver shows the current signal strength and signal quality of 
the selected transponder. 

Press the 

 button to move to the next selection item.

The selection items: DVB type, FEC, polarisation and symbol rate need be input only if the 
transponder has yet to be saved (see manual (channel) search).

Service ID

Using the 

 buttons or the keypad, enter here the service ID of the channel being sought.

When you have made your settings, use the 

 buttons to select “Start Search” and press the 

 button 

to start scanning. You can cancel the scan at any time by pressing the 

 button.

During the scan you will see a display that shows you the progress of the scan.

After completion of the scan, you will see the following message (example):

Press the 

 button. You will be asked whether you wish to save the changes or not. Selection is performed 

using the 

 buttons and is confi rmed using the 

 button. If you select “Yes, save changes”, the newly 

found channels will be added to the end of the channel list. Then press the 

 button to exit the menu. 

The channel list is called up on to the TV screen by pressing the 

 button (see also section “On-screen 

displays” “Channel list TV/Radio”).

CHANNEL SEARCH (CHANNEL SCAN)

Содержание UFS 910

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды