manualshive.com logo in svg

Kathrein UFS 910, Руководство по эксплуатации

Поделиться
Скачать
Kathrein UFS 910 Скачать руководство пользователя страница 46

46

RECORD WEEKLY

Use the 

 buttons to select the recording mode “weekly” (see screenshot below).

Use the 

 buttons to switch to the selection fi eld “Start” and use the 

 buttons to select the 

desired recording starting time.

Use the 

 buttons to switch to the selection fi eld “End” and use the 

 buttons to select the 

desired recording fi nishing time.

When all settings have been made, press the 

 button to save the recording settings. You can view the 

scheduled recording in the recording schedule view of the EPG (see item “Recording schedule”).

Remember that the day of the week for the desired programme is loaded in 
the recording schedule and you can make no further manual corrections to it! 

Therefore before pressing the 

 (red dot) button, select the programme on the 

day of the week that in future you will wish to make the weekly recording.

RECORD USER-DEFINED

Use the 

 buttons to select the recording mode “user-defi ned” (see screenshot below).

Use the 

 buttons to switch to the selection fi eld “Day” and use the 

 buttons to select the 

desired recording day. Press the 

 button to fi x the selection (the day will be shown in red letters). 

If necessary the receiver will suggest some days to you; you can accept these suggestions or deactivate 

them again using the cursor buttons and pressing the 

 button once.

Use the 

 buttons to switch to the selection fi eld “Start” and use the 

 buttons to select the 

desired recording starting time.

EPG - ELECTRONIC PROGRAMME GUIDE

Содержание UFS 910

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды