manualshive.com logo in svg

Kathrein UFS 910, Руководство по эксплуатации

Поделиться
Скачать
Kathrein UFS 910 Скачать руководство пользователя страница 41

41

EPG - ELECTRONIC PROGRAMME GUIDE

CATEGORIES VIEW

The “Categories” view can be called up at any time in EPG by pressing the 

#

 (blue) button.

In the “Categories” view you can see all programmes sorted by category and starting time.
The following categories are available for selection: Movies, Series, Sport, Children’s programmes, 
Chat shows, News, Magazines/Reportage, Art/Culture, Science/Education, Music, Leisure and Adult 
programmes.

Programmes can be assigned to the above categories only if the EPG data has been supplied by the 
channel provider.

Select the required category using the 

 buttons. You can then use the cursor buttons (

) 

to select the desired category and if available you can use the 

 button within each category to call up 

further information on the desired programme.

The 

&

 button allows you to scroll backwards and forwards a day at a time.

Using the 

 (red dot) button you can load the selected programme into the recording settings (see item 

“Recording”).

Содержание UFS 910

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды