Kathrein UFS 910 Скачать руководство пользователя

Страница: 31 / 88

OPERATING INSTRUCTIONS

The structure of the menu concept is based on logical operating sequences. The programme showing on
the current selected channel always appears in the top right-hand corner of the screen.

You will fi nd detailed descriptions of the selected menu items in the relevant sections of the
operating manual!

Note:

The selected menus, sub-menus and positions, as well as the parameters to be set, are each
highlighted in colour. The menus are self-explanatory.

Pay attention to the bar at the
bottom of the on-screen display! This
provides hints on what to do next.

Press the

button to access the main menu, and use the

buttons to select the sub-menus.

Press the

button to access the sub-menus. Use the

buttons to select the sub-menu options.

The settings under the various options are made either by pressing the

buttons or using the numeric

pad.

You can exit the main menu and sub-menus, and the various options, step-by-step by pressing the

button (the settings/changes you made are saved). Press

to return directly from one of the menus to

the TV picture (the settings/changes you made are saved).

MENU CONCEPT

Содержание UFS 910

























































































Результаты поиска

Содержание UFS 910

Отзывы:

Похожие инструкции для UFS 910

Бренды по названию

Популярные бренды

Kathrein UFS 910, Руководство по эксплуатации

Результаты поиска

Содержание UFS 910

Отзывы:

Похожие инструкции для UFS 910

Бренды по названию

Популярные бренды