90
Main menu - Settings
Automatic
Manual
You need not perform any further input, the
receiver will automatically update the date and
time.
Use the numeric keypad or the
buttons
to input the correct date. Then use the
buttons to switch to the “Time”
fi
eld and use
the numeric keypad or the
buttons to
input the correct time. Then use the
button
to con
fi
rm your input.
Update Time now
Press the
button. Depending on the desired time setting (Automatic/Manual) the following display
then appears:
After calling up the menu you will see the
following display:
You can use this function to allow you
to operate several receivers (e.g. four
UFC 960sw units) using the same remote
control. You can assign each receiver its own
remote control code. This pre-supposes that
the receiver was supplied with the RC 670
remote control (e.g. UFC 960sw) or with the
RC 660 remote control (e.g. UFS 910).
