15
Connection and setup
Required buttons on remote control for initial installation:
...
Numerical input
$
(green)
Proceed to next step in
initial installation
#
(red)
Go back one step in the
initial installation
Con
fi
rm the changed
values/setting
@
Select/change individual
menu parameters, navigation
Cancel input, go back
Before you start to use the UFC 960sw, read the sections “Safety Instructions
- Important Instructions”, “Important Information” and “Connection and Getting
Started” through to the item “First Installation”.
Do not connect the unit to the mains until all installation work has been properly
carried out.
The guidance given in the “First Installation” item assumes that the receiver has
been properly connected as per the “Safety Instructions - Important Instructions”,
“Important Information” and “Connection and Getting Started” through to the item
“First Installation”.
First switch your TV set on and select the AV channel slot you have used to connect the UFC 960sw to
your TV set. Start up the UFC 960sw by switching on the power switch at the rear of the unit. The following
display appears:
Use the
buttons to select the
desired menu language for your UFC
960sw and con
fi
rm your selection using
the
button. The selected language is
Always pay attention to
the bar at the bottom of
the on-screen display.
This provides information
on what to do next.
indicated with a tick. The following languages are available: German, English, French, Italian, Spanish,
Czech, Dutch, Polish and Turkish.
Press the
$
(green) button to move to the next menu.
