81
After calling up the menu you will see the
following display:
The
buttons allow you to select
different sets of parameters for the search.
Frequency
Using the
buttons, select the frequency to be searched.
Symbol rate
Use the
button or the numeric keypad to enter the related symbol rate.
QAM Mode
Use the
buttons to enter the respective QAM mode.
Channel Search Mode
Use the
buttons to select the type of channels that are to be searched for. You have three options:
- “free & scrambled”
All channels are searched for
- “only free”
Only free-to-air channels are searched for
- “only scrambled”
Only encrypted channels are searched for
Network Search
Use the
buttons (On/Off) to select whether a Network Search should be performed. If the “Network
Search On” is selected, the networking of the transmission channels enables additional transmission
channels that have not yet been saved to be located. They are then saved and searched for new channels
in the same way as the existing channels.
If “Network Search Off” is selected, only the factory-set frequency range will be searched.
Once you have performed all the settings, use the
buttons to switch to the “Start Search”
selection
fi
eld and con
fi
rm the start of the searching using the
button.
Main menu - Channel search
